Blog · Blog

← All posts

How to Calculate Per Day Salary From Monthly Pay

4 Nov 2026 · 6 min read · Blog

How to calculate per day salary: fixed 30, calendar and working day methods

Two developers earn the same 60,000 PKR a month. Both miss one day. One loses 2,000 and the other loses 2,308. A payslip dispute follows, and the company has no written rule to settle it.

Pick fixed 30 or working days once, put it in the contract, and never mix them. An agency on a six-day week should divide by 26 working days. One lost day then costs exactly one scheduled day of pay, and the rate does not move with the month. Fixed 30 is the fallback if you want one identical rate every month.

Per day salary is the pay for the period divided by the agreed number of days. All examples use 60,000 PKR a month, the pay of a mid-level developer at a Lahore software house. These are sample numbers, not a market benchmark. On a fixed 30 days the rate is 2,000. On 26 days it is about 2,308.

Table of Contents

Pick the Divisor Before You Divide

The formula is easy: salary for the pay period ÷ the agreed number of days. The hard part is the number of days. Your contract or payroll policy decides it.

Here is the same 60,000 salary under four divisors.

Method Divisor Daily rate
Fixed 30 days 30 2,000.00
Calendar days, 31-day month 31 1,935.48
Working days, five-day week 22 2,727.27
Working days, six-day week 26 2,307.69

When each method is used

  • Fixed 30 days suits simple, predictable payroll. The rate is the same every month.
  • Calendar days suit pay that follows the month. The rate shifts between a 28-day and a 31-day month.
  • Working days suit pay that follows the schedule. You count the days the person is scheduled to work that month.

A company can also set its own fixed divisor in its payroll policy. For an annual salary, divide by the paid working days in the year. Paid holidays and approved leave can sit inside that count.

A six-day agency paying by attendance: use 26. A salaried five-day remote team with no deductions: fixed 30 is fine. Consistency comes first. But for absence deductions on a six-day week, 26 is the defensible divisor, because one lost day then equals one scheduled day of pay.

The wrong move is switching methods between employees or months without writing it down. Start with gross pay. Handle tax, allowances and bonuses separately.

Same Salary, Five-Day Week Versus Six-Day Week

Take the 60,000 monthly salary. A five-day team divides by 22 working days and gets 2,727.27 a day. A six-day team divides by 26 and gets 2,307.69.

The six-day rate is lower because the same monthly pay covers more working days. The employee earns the same 60,000 either way. Only the value of one day changes.

Hourly equivalent

Divide the daily rate by scheduled hours per day. With an 8-hour day, the five-day rate becomes 340.91 an hour. The six-day rate becomes 288.46.

Breaks, overtime and compressed workweeks change the hours figure. A four-day week with 10-hour days gives a different hourly number from the same salary. Write the assumed hours down.

Hourly staff

Hourly staff follow a different formula: hourly rate × payable hours. Do not mix it with the salaried method. A rate of 300 an hour with 7.5 payable hours gives 2,250 for that day.

Tracked hours do not replace the pay basis in the contract. They show what was worked. The contract still says what is paid.

How to Calculate Per Day Salary for Part Months

Use one proration formula: monthly salary × paid days ÷ divisor. Paid days are the days your policy says count as paid. Everything below uses the 60,000 salary.

A mid-month joiner

Say the person starts on the 16th of a 31-day month.

  • Fixed 30: 15 paid days. 60,000 × 15 ÷ 30 = 30,000.
  • Calendar days: 16 paid days (16th to 31st). 60,000 × 16 ÷ 31 = 30,967.74.
  • Working days: 12 of 22 working days remain. 60,000 × 12 ÷ 22 = 32,727.27.

A leaver with paid and unpaid days

Say a person leaves after the 20th of a month under a fixed-30 policy. The daily rate is 2,000. Of the 20 days, 18 were worked or public holidays, one was approved paid leave and one was an unpaid absence.

Paid days are worked days, public holidays and approved paid leave, as the policy defines them. That makes 19 paid days. Pay is 2,000 × 19 = 38,000.

To deduct one unpaid day, use the same daily rate and the same divisor as the rest of that payslip. Never divide by 30 for pay and 26 for deductions. On this example, a 26-day deduction takes 2,307.69 instead of 2,000. That over-deducts 307.69. Deductions for late coming should follow the same divisor.

Overtime, bonuses and allowances sit outside the daily rate unless your policy says otherwise. Print the working on the payslip so the employee can check it:

Monthly salary: 60,000
Divisor: 30 (fixed, per payroll policy)
Daily rate: 2,000
Paid days: 19 (18 worked/holiday, 1 approved paid leave)
Unpaid days: 1
Gross for period: 38,000

Which Rule Applies Where You Operate?

Your contract, your written payroll policy and the law that covers your staff decide the divisor. For a Pakistan-based team, three instruments matter. Read the current text on Pakistan Code, the government's official law database, and search the Act titles below.

The first is the Payment of Wages Act, 1936. Section 9, headed "Deductions for absence from duty", sets the limit.

Section 9(2) says a deduction may never bear a larger proportion to the wages for the wage period than the period of absence bears to the total period in that wage period when the person was required to work.

On a six-day week, 26 gives that exact proportion and 30 gives a smaller deduction. The Act does not set 26 or 30 as a required divisor. Whether your software house falls inside the Act depends on its definitions of employer and employee, so check coverage.

The second and third are the Industrial and Commercial Employment (Standing Orders) Ordinance, 1968, and your province's shops and establishments law, such as the Punjab Shops and Establishments Ordinance, 1969. These deal with working hours, weekly holidays and leave. I know of no section in them that fixes a 26 or 30 divisor. The divisor stays a contract and policy choice, and a labour lawyer can settle a borderline case.

In Clockade, each company sets its own day-pay rule, so the divisor you chose is the one every payslip uses. Staff get free leave days each month, and unpaid leave beyond those is deducted in payroll at that daily rate, like the "Unpaid days: 1" line above. See how the payroll software handles the divisor and payslip lines.

You still own the pay policy and the legal check. Real tracked hours from the Mac and Windows apps flow straight into attendance, leave, payroll and invoices in one login, at $3 per person a month. If you want to settle how to calculate per day salary without a spreadsheet, Start with Clockade.

Frequently Asked Questions

Is per day salary always monthly salary divided by 30?

No. Thirty is one common choice. Others are actual calendar days, scheduled working days, or a fixed divisor such as 26. Your contract or payroll policy sets the one you use.

Why do some companies divide by 26?

Many use 26 for a six-day schedule, so one day equals one scheduled working day. It is a policy choice. A six-day week alone does not prove that 26 is required.

How do I deduct one day of unpaid leave?

Use the daily rate from the same divisor as that payslip. On a fixed-30 basis with a 60,000 salary, the deduction is 2,000. Do not switch divisors between pay and deductions.

Do tracked hours replace the salary basis?

No. Tracked hours show what was worked. The contract still defines pay type, overtime, breaks, paid leave and the divisor.

Track real hours, not guesses.

Clockade turns your team's tracked time into attendance, leave, payroll and invoices. From $3 per person a month.

Start with ClockadeSee pricing

More from the blog